Banjo Tone Woods

“The tone ring is the most important banjo part; the wood doesn’t make any difference!”

“Tone wood matters in guitars and violins…banjos are mechanical and wood has no effect.”

Statements like these are saying, “the quality of meat in the spaghetti sauce is the most important part: the quality of the tomatoes makes no difference.”  So… does that mean green, un-ripe tomatoes, or rotten tomatoes don’t affect the sauce?

I think it’s fair to say they do. The wood used in a banjo has a profound effect on tone and response.

Different wood species vary in density, acid or oil content, hardness, resonance, etc.  It is true that each species of wood can vary somewhat, like a particularly hard piece of walnut or a particularly soft piece of maple.

But, as a general rule of thumb, each species can be at least generally characterized by certain qualities.

Banjo Tone Woods


Mahogany is the softest of the hardwoods.  It is characterized by a gentler sound; A warmer sound.  I characterize it like a “soft focus photograph”.  The sound is warm with a soft edge.  Bela Fleck has stated that he likes the sound of mahogany banjos.  For the player who is not searching for brightness and quick response,  and prefers a slightly softer, “sweeter” sound, mahogany is ideal.

The “response” is how the strings react to your fingers.  Mahogany has a slower feel.  There is a feeling of “pulling the sound out of the banjo.”

It is an extremely stable and somewhat oily wood.  It is usually medium brown with a bit of red and/or orange in its color.  It is also becoming harder to find.  If you are interested in a mahogany banjo, buy it now before it is impossible to find.


Maple is an acidic wood.  It tends to create a very bright sound and responds very quickly.  By quickly I mean, plucking the string feels like something pops or snaps.   There is a feeling of “the sound popping or snapping right out of the banjo.”  One customer described it as “breaking a glass rod with every pluck.”

Maple has a clear sound with a sharp, clearly defined edge.  It is a bit like a razor sharp photograph where every detail is crisp and clean.

Maple is generally a harder wood than mahogany and that hardness is one factor that makes maple banjos seem louder.  The softer mahogany neck absorbs some of the strings vibrating energy.  The harder maple neck absorbs less of the string energy so the string energy vibrates stronger at the bridge…which makes the banjo sound a bit louder.  The harder neck wood enhances higher frequencies and therefore the maple banjo sounds brighter.

Maple is light tan, and while some maple is straight grained and almost looks white, some maple has cross grain stripes of a darker tan color sometimes called “fiddle back” or “tiger striped” because of the use in sides and backs of violins and the similarity to the tiger’s stripes.  The “tiger striped” or sometimes called “curly maple” is highly sought after for its dynamic appearance and striking grain patterns.

Maple is very popular among banjoists.


Walnut is a chocolate brown color, acidic and stable wood that is usually harder than mahogany but softer than most maples.   It’s deep color is prized by many banjoists.  It is not as traditionally popular as maple or mahogany, but it is very popular with some players.

Its relative hardness gives it more brightness than mahogany, but more warmth than maple   For players who find maple a little too bright and mahogany a bit too warm, walnut is perfect compromise.

Bluegrass banjo giant and Deering Signature banjo artist Terry Baucom specified straight grained walnut for his Deering “Terry Baucom signature model.”  The blend of brightness and warmth was a perfect match for Terry, “the Duke of Drive.”

How Do These Woods Affect a Banjo’s Sound?


A banjo resonator is laminated for stability and durability.  The exterior wood is a veneer that matches the wood used in the neck.  The sound change from the exterior layer of wood is subtle, but very real.  We have done experiments putting different resonators on the same banjo and noting the differences.

Since the resonator is a “reflector” its effect on the sound can vary due to its density and weight.  The depth and internal shape of the resonator creates a “Tone chamber” that creates a sound of its own, but the tone chamber is not part of our discussion today.

Some customers have asked us for a maple resonator for their mahogany banjo to make the sound “pop.”  The effect of the resonator, while definite, is pretty subtle. You won’t make a mahogany-necked banjo “pop” merely be installing a maple resonator.

Singing in a concrete bunker is very different than singing in a carpeted office.  One has hard dense walls that bounce sound around the room and the other has furniture and carpet that absorbs sound to make things quieter.  This is an illustration of how the sound can be affected by the density and hardness of a resonator.

A hard maple veneer on the resonator makes the resonator a little stiffer and heavier.  A mahogany veneer makes the resonator a little softer and lighter.


These changes have a similar effect as the wood in the neck, but the neck, because the strings are fastened directly to it via the tuning machines, have a profound effect on the banjos sound.

If I tied one end of a rope to a concrete wall and the other end to the end of a two by four that has been pressed into the ground, and I push on the rope or “pluck” the rope, the two by four will bend a bit and the wall will not.

Now, if I tied the rope to the wall and then press a steel “I” beam into the ground, the “I” beam will still bend more than the wall, but the rope will not move as easily as when it is tied to the wall and the two by four.

So, if I stretch a banjo string over a neck that is softer, every time I pluck the string, the softer wood will bend or deflect with the pressure of plucking the string.

And, if I stretch that banjo string over a neck that is harder, every time I pluck the string, the harder wood will bend less than the softer wood, and more of the plucking energy will be absorbed by the bridge and the banjo head.

Maple is popular partly because the maple neck seems “louder” because the stiffer neck absorbs less energy of the string vibrating but the energy has to go somewhere and so it goes into the bridge and head.

Mahogany is popular because when it is absorbing some of the string vibrating energy, it softens the energy going to the bridge and head and creates a “sweetness” of tone in a banjo.

If the wood in an instrument has any natural oil in it, this also gives the banjo a little bit of warmth.  Acid is much lighter in weight than oil and so woods like maple and walnut, which have more acid content than oil, tend to sound a little “dryer”.   One is not better than the other, they are just characteristics that we utilize when helping customers create their “sound” or when we design a banjo model.

What Should I Choose for My Banjo?    

The tone wood in the neck and resonator add a “color” to the banjo tone.  The effect is like a subtle “shading” of the tone…. A little brighter, a little warmer, a little quicker responding, a little gentler response…

The tone wood does not have the dramatic effect of a different tone ring, or flange design, etc, but it has a very definite enhancing effect.

So, ignoring the choice of tone ring, flange design, tailpiece, etc, here are a few rules of thumb.

  • Maple will enhance the brightness. It will give you the brightest sound possible.  Maple will also give you the most dynamically responsive banjo you can get - it will let you play very soft or very loud.
  • Mahogany will create the warmest sound possible. If you like to feel like “pulling the sound” out of a banjo, mahogany is a great choice.
  • If you want something in between, walnut and koa are good choices.


So, wood choice isn’t the whole picture, but it is a definite part of what contributes to the banjo’s tone color.


  • Barry

    Thanks for the response Anthony. The quote at the beginning of the article is a quote that I’ve heard over the years that is not accurate but constantly being repeated around some banjo circles. It’s an example of the mentality that “this item is the most important in the formula.” But a formula is just that; a combination of ingredients that create a finished product that is more than the parts. The choice of rim wood is fun for banjo enthusiasts to experiment with to find new and different banjo voices. It is true that each kind of wood tends to have its own character of sound. Over the years, we have observed that most banjo enthusiasts “come back” to maple rims after trying out various exotic rims. There is a tone that most of us associate with a banjo that is only found in a banjo with a maple rim. However, experimenting is enlightening and great fun. The “lost Timbre” rims and “sunken maple” rims are an interesting phenomenon. There is a lot of press among hobbyist banjo players but few professionals that I know use these rims. This is not to say there isn’t merit in this “water matured” wood, but it hasn’t taken hold of the banjo market in any significant way. It’s difficult to know that this wood is all that it is marketed to be when, just like in guitar building, the finest wood makes an average guitar if the maker is not skilled. Just like a most skilled maker can make a great guitar with modest wood. I’ve heard banjos with the lost wood rims and some were nice and some were just ok. We’ve never been commissioned to make a lost wood rim banjo so my personal experience is limited. When Deering makes banjos, we also must find sources of wood that are reliable and consistent. Our violin maple is reasonably available and very consistent and sustainable. We hope to be able to make these rims for years. But our choice of this violin maple is because it gets us closer to the “magic tone voice” that we and many banjoists are searching for. Other woods sound nice, but we are looking for the combination of clarity, vibrance, warmth and sustain that we and thousands of banjoists have dancing about between our ears. We keep looking….and picking….and looking…. and picking….. Thanks for your email Anthony. Please keep in touch.

  • Barry

    Hi Karl. Thank you for reading the articles. For our readers, Karl has definite ideas about what makes a good banjo. Just remember that his ideas fit his concept of what makes a good banjo, but not necessarily what YOU might think is a good banjo. We welcome everyone’s ideas and opinions.

  • Barry

    Hi Paul, We have experimented with other woods for rims. In our banjos, we have found that the violin maple that we are currently using creates the most vibrant combination of brilliance and warmth available. Some of the choice is inspired by violin building. The violin was designed to create a sound to capture some of the magic of the human voice in an instrument. There are certain tonal characteristics that we human beings seem to respond to “intuitively” when we hear them. Other instrument sounds might be “interesting”, but not have the deeper “connection” that we hear in certain instruments. Instrument makers often chase this elusive “characteristic” their entire lives. Stradivarius is one of the famous violin makers whose search for this “deep connection” created some of the most sought after violins in history. We are aware of many woods that have been used in banjo rims, and we have seen customers continually put them aside in favor of the maple rims. We are in a place in our “search for the connecting magic” that we feel the violin maple has brought us closer to our goal than ever before. But, the world is a big place and there are so many wonderful experiences out there, so, because it is a fun and wonderful adventure experimenting with these different woods, as it is said in the popular slogan, “go for it.”

  • Paul


    Thanks for another great column! Here’s a follow-up question. You mentioned the neck and resonator, but what about rims made of species other than maple? I recently changed out the rim one of my (non-Deering) banjos to black walnut, and the difference was striking. It’s sound is an interesting alternative to my Eagle II (though the Eagle is still my favorite).


  • Karl Markl

    Banjo woods—let’s take a look at the woods that are used for the various parts of the banjo.
    Always only use old wood with crystallized sap. It is the most stable and gives the best sound.
    The Pot—I prefer a thick (3/4-7/8 inch) hardwood core and outside layer. The inside layer of the pot can influence the sound. A thin veneer can be added to the inside of the pot to customize the sound.
    The Neck—I like Spanish Cedar because it is strong, lightweight, very stable, and yet finish nicely with nitrocellulose lacquer. Spanish Cedar can be found with a fiddle-back grain. The neck blanks are available at Hibdon Hardwoods in St. Louis.
    The Fret board—Hardwoods like ebony, rosewood, or snake wood are all fine. Don’t forget to keep your fret board oiled. I have seen many good banjos with dry rotted fret boards. Frets start to get loose when the fret board starts to dry rot. This can also be a source of buzzing.
    The Resonator—The choice of wood for the inside laminate of a resonator will give you the greatest difference in sound because it is the largest surface area that the sound is exposed to. Softer woods for mellow sounds, or harder woods for a brighter sound. I prefer a slightly thinner back so I can feel the sounds on the back of the banjo. The parabolic back focuses the sound out of the banjo giving the banjo more volume. The choice of glue is very important.
    The bridge—Two vs. three footed bridges are important. The choice is yours. Inserts in the bridge sometimes can increase the volume and sound of the banjo. I have been very satisfied with the Jim Farquhar bridges.
    The glue—Use a hide or epoxy glue rather than an aliphatic white glue because the hide and epoxy glues dry hard and fast.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.